Search productSearch post
Clean Swab is constructed from double-layer polyester cloth that is free from organic contaminants such as silicone, amides or phthalate esters.
The cloth is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings.
Laundered and packed under an ISO Class 4 Cleanroom, the foam exhibits low particulate and ionic content.
It has excellent compatibility with most common solvents including acetone as well as excellent sorbency and solvent-holding capacity.
The double-layer polyester fiber head is compressed and possesses good firmness.
The fiber head is designed for cleaning small, slotted and recessed areas.
The excellent cleaning is controlled and supported flexible Paddle.
The swab handle is ESD-safe and is made from polypropylene.
The handle is compact and will not contribute to particulate or organic contamination.
Designed for general purpose cleaning.
Open the printer cover.Remove the ribbon from the printer.Close the cover and check it has clicked shut.Open the card feeder and remove the cards.Take a new T-shaped cleaning card supplied by Evolis and open the sachet.Press the pushbutton on...
View detailsManufacturer of Industrial swabs The production of Industrial swabs is produced and processed in the clean rooms stipulated by the trade.The requirements for the environment are relatively high throughout the process.So, compared with other cotton...
View detailsThis is a cleaning instruction for a common cash count.1.Turn off the cash count.2.Remove the hopper and the feeder.3.Use a brush to remove the dust on the roles and sensors.4.Remove the remaining dust with dust spray remover.5.Close the feed...
View detailsThese are ZEBRA 105912-707 Cleaning Card for the Zebra card printers. It is highly recommended that you use ZEBRA 105912-707 Cleaning Ca...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
